BLOG
Machining process and technology
2024-04-30
fine machining can be divided into upper and lower die methods, which can be completed through comprehensive processes such as planing, milling, etching, turning, and EDM. The size and pit shape of the fine machining are consistent with the edge of the product, mainly because the wax die is mainly used for industrial wax forming, so its melting point is not high and the hardness is not high when selecting, and the aluminum alloy material with relatively cheap and light weight is used as a mold.
After the first two sandblasting and natural air drying, the third sandblasting, the fourth sandblasting, the fifth sandblasting and so on are carried out in turn. Then adjust the number of sandblasting according to the size of its volume, surface requirements and self-weight, etc., generally the number of sandblasting times is 3-7 times.
meticulous machining will coat multiple wax patterns on the fixed die with industrial glue and evenly spray a layer of fine sand, which is very small and fine, so that the surface of the blank can be as smooth as possible. After the fine machining is completed and naturally air-dried, the industrial glue will continue to be applied to the surface of the wax model in the process of use, and then a layer of sand will be sprayed, the particle size is larger and coarser than the previous layer of sand, and the wax model will be naturally air-dried at a set constant temperature after spraying.
Previous page:
Next page:
related blog
2026/05/22
JINAOFENG participate AGRITECHNICA ASIA 2026– Bangkok, Thailand May 20th - 22nd, 2026
Yuhuan Jinaofeng Machinery Co., Ltd. stands on the golden coast of Yuhuan, Zhejiang.
2026/05/22
JINAOFENG participate Automechanika Istanbul 2026
Yuhuan Jinaofeng Machinery Co., Ltd. stands on the golden coast of Yuhuan, Zhejiang.
2026/03/13
Function: Convert pneumatic (or hydraulic) pressure into mechanical thrust, push the brake shoes towards the brake drum (or brake disc), and generate braking force.
2026/03/13
What are the components of a car braking system
The braking system of a car mainly consists of the following parts:1. Brake pedal: The driver sends a deceleration signal to the engine control unit (ECU) by operating the brake pedal.
Contact Jinaofeng
Add: Ocean Economic Development Zone, Kanmen Xuanmen Phase III, Yuhuan City, Taizhou City, Zhejiang Province, China
Tel: 0086-576-87568321
E-mail: jaf1855@cnjaf.com
