BLOG
"Machining" surface treatment
2024-04-30
machining surface treatment:
1. Chemical polishing: a process method in which the surface of the workpiece undergoes chemical or electrochemical changes under the action of abrasives and chemical solvents, so as to achieve the purpose;
2. Cationization: A method of coating an oxide film containing metal cations on the surface of a workpiece and oxidizing it into a non-ferrous metal layer under appropriate conditions. Metal anoidation processes include electrolytic oxidation, chemical oxidation and plasma oxidation.
3. Sandblasting: a process method that uses mechanical methods to produce fine sand-like roughness on the surface of the workpiece to improve its surface friction characteristics;
4. Electroplating: The process method of coating a layer of metal film on the surface of metal or alloy by chemical or electrolytic methods. Electroplating is a widely used and large-scale surface treatment technology in hardware processing.
The manufacturing accuracy of fine machining is high, and the surface of the product is smooth and clean in the process of use, that is to say, the fine machining produced by the production and processing can save a lot of machining work, and can be directly used in life. There will be many gray-black circular shallow pits on the surface of the fine machining, and the equipment fills the pits with this slag material before cleaning, which will directly affect the quality of our castings.
fine machining is the use of a cast iron material, its comprehensive properties are close to steel, it is based on its good performance, has been successfully used to cast some parts with complex stress, strength, toughness and requirements. Ductile iron has developed into a widely used cast iron material second only to gray cast iron. so-called
Previous page:
related blog
2026/05/22
JINAOFENG participate AGRITECHNICA ASIA 2026– Bangkok, Thailand May 20th - 22nd, 2026
Yuhuan Jinaofeng Machinery Co., Ltd. stands on the golden coast of Yuhuan, Zhejiang.
2026/05/22
JINAOFENG participate Automechanika Istanbul 2026
Yuhuan Jinaofeng Machinery Co., Ltd. stands on the golden coast of Yuhuan, Zhejiang.
2026/03/13
Function: Convert pneumatic (or hydraulic) pressure into mechanical thrust, push the brake shoes towards the brake drum (or brake disc), and generate braking force.
2026/03/13
What are the components of a car braking system
The braking system of a car mainly consists of the following parts:1. Brake pedal: The driver sends a deceleration signal to the engine control unit (ECU) by operating the brake pedal.
Contact Jinaofeng
Add: Ocean Economic Development Zone, Kanmen Xuanmen Phase III, Yuhuan City, Taizhou City, Zhejiang Province, China
Tel: 0086-576-87568321
E-mail: jaf1855@cnjaf.com
